Hyundai Santa Fe: Body Electrical System

Hyundai Santa Fe (TM) 2019-2025 Service Manual / Body Electrical System

Rear Seat Belt Buckle. Repair procedures

Replacement [Second row seat belt buckle]    • Be sure to remove the second row center seat belt buckle (A) and the second row seat assembly [RH] (B) after removing the second row seat assembly [LH / RH]...

General information

General Troubleshooting Information Before Troubleshooting 1. Check applicable fuses in the appropriate fuse/relay box...

Other information:

Hyundai Santa Fe (TM) 2019-2025 Owner's Manual: System operation


Operating conditions Smart Cruise Control will operate when the following conditions are satisfied. Basic function The gear is in D (Drive) The driver’s door is closed EPB (Electronic Parking Brake) is not applied Your vehicle speed is within the operating speed range -- 5~110 mph (10~180 km/h): when there is no vehicle in front -- 0~110 mph (0~180 km/h): when there is a vehicle in front ESC (Electronic Stability Control), TCS (Traction Control System) or ABS is on ESC (Electronic Stability Control), TCS (Traction Control System) or ABS is not controlling the vehicle Engine rpm is not in the red zone Forward Collision-Avoidance Assist brake control is not operating Remote Smart Parking Assist brake control is not operating Information At a stop, if there is no vehicle in front of your vehicle, the system will turn on when the brake pedal is depressed...

Hyundai Santa Fe (TM) 2019-2025 Service Manual: Specifications


Specifications Items Specification Hood Type Rear hinged, gas lifter type Front Door Construction Front hinged, frame door construction Regulator system Wire drum type Locking system Pin-fork system Rear Door Construction Front hinged, frame door construction Regulator system Wire drum type Locking system Pin-fork system Tail Gate Type Front hinged, gas lifter type Seat Belts Front 3 point type with Emergency Locking Retractor (E...

Categories

Air bag collision sensors

WARNING

To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death:

Do not hit or allow any objects to impact the locations where air bags or sensors are installed. Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should. Installing bumper guards with nongenuine Hyundai or non-equivalent parts may adversely affect the collision and airbag deployment performance. Press the Engine Start/Stop button to the OFF or ACC position and wait for 3 minutes when the vehicle is being towed to prevent inadvertent air bag deployment. Have all air bag repairs performed by an authorized HYUNDAI dealer.

read more


 
Copyright © 2025 www.hsafe4.com