Heater & A/C Control Unit (Manual). Components and components location Component Connector Pin Function Pin No Connector A Connector B 1 Battery Low 2 ISG B+ Common 3 ILL+ (TAIL) Ground 4 Sensor REF (+5V) Middle Low 5 Mode Actuator Feedback Middle High 6 Temperature Actuator Feedback High 7 Intake Actuator Feedback - 8 Evaporator Temperature Sensor (+) 9 Ambient Temperature Sensor (+) 10 Mode Actuator (Vent) 11 Mode Actuator (Defrost) 12 Temperature Control Actuator (Cool) 13 Temperature Control Actuator (Warm) 14 Intake Actuator (Fresh Air) 15 Intake Actuator (Recirculated Air) 16 HTD (Rear Defrost) 17 Rear Defogging Swich 18 Rear C-LINE 19 Blower Common Signal 20 ILL - (RHEO) 21 IGN2 22 IGN1 23 - 24 Rear Blower Motor (+) 25 Rear Mosfet (GATE) 26 Rear Mosfet (DRAIN F/B) 27 Max Blower on Signal 28 PTC Relay 2 (DIESEL) PTC Relay 1 (GASOLINE) 29 - 30 PTC ON Signal (DIESEL) - (GASOLINE) 31 - 32 - 33 P-CAN_(HIGH) 34 P-CAN_(LOW) 35 - 36 ECV (+) 37 ECV (-) 38 Sensor Ground 39 Ground 40 Ground Heater & A/C Control Unit (Manual).
Description System Description Advanced Driver Assistance System (ADAS) analyzes the exterior environment of a vehicle and driver status to provide visibility / display / guide / warning for driving and parking.
Description and operation Description AVN system The AVN system has improved information search and easiness of manipulation for the driver by simplifying the system operation experience and unifying the display of the user information such as multimedia and car information.
Inspection 1. Emit intensive light toward the photo sensor using a lamp, and check the output voltage change. 2. The voltage will rise with higher intensive light and reduce with lower intensive light.