Hyundai Santa Fe: Parking Distance Warning (PDW) / Ultrasonic Sensor. Repair procedures

Hyundai Santa Fe (TM) 2019-2025 Service Manual / Advanced Driver Assistance System (ADAS) / Parking Distance Warning (PDW) / Ultrasonic Sensor. Repair procedures

Removal

1.	Disconnect the negative (-) battery terminal.

2.	Remove the front/rear bumper. (Refer to Body - "Front Bumper Cover") (Refer to Body - "Rear Bumper Cover")

3.	Disconnect the connector from the parking distance warning sensor.

4.	Pull out the sensor (A) by opening the sensor holder out.

Installation

1.	Install the Parking distance warning sensor after connecting the connector.

2.	Install the front/rear bumper cover.

3.	Connect the negative (-) battery terminal.

Ultrasonic Sensor. Schematic diagrams

Surround View Monitor (SVM)

Other information:

Hyundai Santa Fe (TM) 2019-2025 Service Manual: In-car Sensor. Description and operation

Description The In-car air temperature sensor is built in the heater & A/C control unit. The sensor consists of a thermistor that measures the inside temperature. The signal decided by the resistance value that changes in accordance with perceived inside temperature, is delivered to heater control unit, and according to this signal, the control unit regulates in-car temperature to intended value...

Hyundai Santa Fe (TM) 2019-2025 Service Manual: Piston and Connecting Rod. Repair procedures

Disassembly • Be careful not to damage the parts located under the vehicle (floor under cover, fuel filter, fuel tank and canister) when raising the vehicle using the lift...