Hyundai Santa Fe: Rear Corner Radar System / Rear Corner Radar Unit. Schematic diagrams
Connector and Terminal Function |
[Connector Funtion]
Specifications
[BCW, BCA]
Items
Blind-Spot Collision Warning (BCW)
Blind-Spot Collision- Avoidance Assist (BCA)
Blind-Spot Collision- Avoidance Assist (BCA)
※Parallel Exit
Rated voltage
DC 12V
Operating voltage
9V ~ 16V
Operating speed
20 ㎞/h ~ 255 ㎞/h
60 ㎞/h ~ 200 ㎞/h
0 ㎞/h ~ 3 ㎞/h
Sensible distance
70m
80m
Frequency
24 GHz
Numbers
2 EA
[RCCW, RCCA]
Items
Rear Cross-Traffic Collision Warning System (RCCW)
Rear Cross-Traffic Collision- Avoidance Assist (RCCA)
Rated voltage
DC 12V
Operating voltage
9V ~ 16V
Operating speed
0 km/h ~ 10 km/h
0...
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear bumper cover...
Other information:
Prerequisite for activation
ISG system operates in the following situations.
The driver's seatbelt is fastened
The driver's door and hood are closed
The brake vacuum pressure is adequate
The battery sensor is activated and the battery is sufficiently charged
Outside temperature is not too low or too high
The vehicle is driven over a constant speed and stops
The climate control system satisfies the conditions
The vehicle is sufficiently warmed up
ISG related parts are working properly
The incline is gradual
The steering wheel is turned less than 180 degrees and then the vehicle
stops
Information
If the ISG light (white) is turned on on the instrument cluster and does not
meet the ISG system operating conditions, the ISG system is not activated...
Ventilation
1. Set the mode to the position.
2. Set the air intake control to the outside (fresh) air position.
3. Set the temperature control to the desired position.
4. Set the fan speed control to the desired speed.
Heating
1. Set the mode to the position...
Categories
WARNING
To reduce the risk of an air bag deploying unexpectedly and causing serious
injury or death:
Do not hit or allow any objects to impact the locations where air
bags or sensors are installed.
Do not perform maintenance on or around the air bag sensors. If
the location or angle of the sensors is altered, the air bags may deploy when
they should not or may not deploy when they should.
Installing bumper guards with nongenuine Hyundai or non-equivalent
parts may adversely affect the collision and airbag deployment performance.
Press the Engine Start/Stop button to the OFF or ACC position and
wait for 3 minutes when the vehicle is being towed to prevent inadvertent air
bag deployment.
Have all air bag repairs performed by an authorized HYUNDAI dealer.
read more