Air Cleaner. Repair procedures Removal and Installation Air Cleaner Assembly 1. Disconnect the battery negative terminal.
Service Data Ignition System Ignition Coil Item Specification Rated Voltage (V) 13.
Inspection 1. Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air. If bent, gently bend them using a screwdriver or pliers. 2.
Description The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.