Hyundai Santa Fe: Steering System / Motor Driven Power Steering
Hyundai Santa Fe (TM) 2019-2024 Service Manual / Steering System / Motor Driven Power Steering
- Description and operation
- Schematic diagrams
- Repair procedures
- MDPS PowerPack Assembly. Repair procedures
- Steering Column and Shaft. Repair procedures
- Steering Gear Box. Components and components location
- Steering Gear Box. Repair procedures
Heated Steering wheel. Repair procedures
Inpection
1.
Measure a resistance of NTC and Heated pad.
–
NTC resistance - 10...
Description and operation
Description
MDPS (Motor Dirven Power Steering) system uses an electric motor to assist the
steering force and it is an engine operation independent steering system...
Other information:
Hyundai Santa Fe (TM) 2019-2024 Service Manual: CVVT (Continuously Variable Valve Timing) System. Description and operation
Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by the engine speed and load. By controlling CVVT, the valve over-lap or under-lap occurs, which makes better fuel economy and reduces exhaust gases (NOx, HC) and improves engine performance through reduction of pumping loss, internal EGR effect, improvement of combustion stability, improvement of volumetric efficiency, and increase of expansion work...
Hyundai Santa Fe (TM) 2019-2024 Service Manual: Fuel Sender. Repair procedures
Removal 1. Remove the fuel pump. (Refer to Fuel System - "Fuel Pump") 2. Disconnect the fuel sender connector (A). 3. Release the fixing hook (A) and then remove fuel sender (B) in the arrow direction...
Categories
- Manuals Home
- 4th Generation Santa Fe Owners Manual
- 4th Generation Santa Fe Service Manual
- Folding the rear seat
- Warning and indicator lights
- Instrument cluster
- New on site
- Most important about car
Air bag collision sensors
WARNING
To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death:
Do not hit or allow any objects to impact the locations where air bags or sensors are installed. Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should. Installing bumper guards with nongenuine Hyundai or non-equivalent parts may adversely affect the collision and airbag deployment performance. Press the Engine Start/Stop button to the OFF or ACC position and wait for 3 minutes when the vehicle is being towed to prevent inadvertent air bag deployment. Have all air bag repairs performed by an authorized HYUNDAI dealer.
Copyright © 2024 www.hsafe4.com