Hyundai Santa Fe: IMS (Integrated Memory) / IMS (Integrated Memory System) module. Repair procedures

Hyundai Santa Fe (TM) 2019-2024 Service Manual / Body Electrical System / IMS (Integrated Memory) / IMS (Integrated Memory System) module. Repair procedures

Removal
1.
Remove the negative (-) battery terminal.
2.
Remove the front seat assembly.
(Refer to Body - "Front Seat Assembly")
3.
Remove the IMS module (B) after disconnecting the connector (A) and loosening the screws (3EA).

Installation
1.
Install the IMS module after reconnecting the connector.
2.
Install the driver seat.
  
Make sure the IMS module connectors and related connectors are plugged in properly.
Check that IMS system operates normally.

    IMS (Integrated Memory System) module. Components and components location

    ..

    IMS Control Switch. Components and components location

    ..

    Other information:

    Hyundai Santa Fe (TM) 2019-2024 Owner's Manual: Changing coolant


    We recommend that coolant be changed by an authorized HYUNDAI dealer according to the Maintenance Schedule at the beginning of this chapter. WARNING Do not use engine coolant or antifreeze in the washer fluid reservoir. Engine coolant can severely obscure visibility when sprayed on the windshield and may cause loss of vehicle control resulting in an accident...

    Hyundai Santa Fe (TM) 2019-2024 Service Manual: Rear Pillar Trim. Components and components location


    ..

    Categories

    Air bag collision sensors

    WARNING

    To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death:

    Do not hit or allow any objects to impact the locations where air bags or sensors are installed. Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should. Installing bumper guards with nongenuine Hyundai or non-equivalent parts may adversely affect the collision and airbag deployment performance. Press the Engine Start/Stop button to the OFF or ACC position and wait for 3 minutes when the vehicle is being towed to prevent inadvertent air bag deployment. Have all air bag repairs performed by an authorized HYUNDAI dealer.

    read more


     
    Copyright © 2024 www.hsafe4.com