Hyundai Santa Fe: Body Electrical System / IMS (Integrated Memory)

Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the glove box. (Refer to Body - "Glove Box") 3...

Description and operation

Description The optimal seat position set by the driver is memorized into the power seat unit by using IMS switch. In case of the position change, the seat can restore its preset position by IMS switch...

Other information:

Hyundai Santa Fe (TM) 2019-2025 Service Manual: Components and components location

..

Hyundai Santa Fe (TM) 2019-2025 Owner's Manual: System operation

Operating conditions Smart Cruise Control will operate when the following conditions are satisfied. Basic function The gear is in D (Drive) The driver’s door is closed EPB (Electronic Parking Brake) is not applied Your vehicle speed is within the operating speed range -- 5~110 mph (10~180 km/h): when there is no vehicle in front -- 0~110 mph (0~180 km/h): when there is a vehicle in front ESC (Electronic Stability Control), TCS (Traction Control System) or ABS is on ESC (Electronic Stability Control), TCS (Traction Control System) or ABS is not controlling the vehicle Engine rpm is not in the red zone Forward Collision-Avoidance Assist brake control is not operating Remote Smart Parking Assist brake control is not operating Information At a stop, if there is no vehicle in front of your vehicle, the system will turn on when the brake pedal is depressed...