Hyundai Santa Fe: Brake System / Repair procedures
Operation and Leakage Check
![](images/repair_procedures-892/464/stmbr10333d.gif)
1. |
Brake Booster (A)
(1) |
Check brake operation by applying the brakes during a test drive.
If the brakes do not work properly, check the brake booster.
Replace the brake booster as an assembly if it does not work
properly or if there are signs of leakage.
|
|
2. |
Piston cup and pressure cup inspection (B)
(1) |
Check brake operation by applying the brakes. Look for damage
or signs of fluid leakage. Replace the master cylinder as an
assembly if the pedal does not work properly or if there is
damage or signs of fluid leakage.
|
(2) |
Check for a difference in brake pedal stroke between quick and
slow brake applications. Replace the master cylinder if there
is a difference in pedal stroke.
|
|
3. |
Brake hoses (C)
(1) |
Look for damage or signs of fluid leakage. Replace the brake
hose with a new one if it is damaged or leaking.
|
|
4. |
Caliper piston seal and piston boots
(1) |
Check brake operation by applying the brakes.
|
(2) |
Look for damage or signs of fluid leakage. If the pedal does
not work properly, the brakes drag, or there is damage or signs
of fluid leakage, disassemble and inspect the brake caliper.
Replace the boots and seals with new ones whenever the brake
caliper is disassembled.
|
|
Brake System (Judder Inspection)
![](images/repair_procedures-892/464/sjxbr00801l.gif)
Other information:
Operating conditions
Smart Cruise Control will operate when the following conditions are satisfied.
Basic function
The gear is in D (Drive)
The driver’s door is closed
EPB (Electronic Parking Brake) is not applied
Your vehicle speed is within the operating speed range
-- 5~110 mph (10~180 km/h): when there is no vehicle in front
-- 0~110 mph (0~180 km/h): when there is a vehicle in front
ESC (Electronic Stability Control), TCS (Traction Control System) or ABS
is on
ESC (Electronic Stability Control), TCS (Traction Control System) or ABS
is not controlling the vehicle
Engine rpm is not in the red zone
Forward Collision-Avoidance Assist brake control is not operating
Remote Smart Parking Assist brake control is not operating
Information
At a stop, if there is no vehicle in front of your vehicle, the system will
turn on when the brake pedal is depressed...
..
Categories
The front seat can be adjusted by using the control switches located on the outside
of the seat cushion. Before driving, adjust the seat to the proper position so that
you can easily control the steering wheel, foot pedals and controls on the instrument
panel.
WARNING
NEVER allow children in the vehicle unattended. The power seats are operable
when the vehicle is turned off.
read more