| Specification |

|
Fluid Type |
|
DOT 4 |
|
Reservoir Quantity (cc) |
||
|
MAX LEVEL |
A + B + C + D |
493 ± 20 |
|
ON LEVEL |
B + C + D |
206 ± 20 |
|
MIN LEVEL |
- |
167 |
|
PARTIAL LEVEL |
C |
Pri : 63 |
|
D |
Sec : 49 |
|
|
CLUTCH LEVEL |
E |
- |
Removal • Be careful not to damage the parts located under the vehicle (floor under cover, fuel filter, fuel tank and canister) when raising the vehicle using the lift.
Replacement • Be careful not to damage the parts located under the vehicle (floor under cover, fuel filter, fuel tank and canister) when raising the vehicle using the lift.
Replacement 1. Using a Lwrench, remove the cap (A) on the bottom of the receiver-drier. 2. Remove the receiver-drier (A) from condenser using a long nose plier. Check for crumbled receiver-drier and clogged bottom cap filter.
Description The A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by operating it high speed or low speed.