Hyundai Santa Fe: Body Side Molding / Rear Spoiler. Components and components location

Hyundai Santa Fe (TM) 2019-2024 Service Manual / Body (Interior and Exterior) / Body Side Molding / Rear Spoiler. Components and components location

Component Location

1. Rear Spoiler

Body Side Molding

Rear Spoiler. Repair procedures

Replacement • Put on gloves to prevent hand injuries...

Other information:

Hyundai Santa Fe (TM) 2019-2024 Owner's Manual: Lane Following Assist (LFA)

Lane Following Assist is designed to help detect lane markings and/or vehicles on the road, and assists the driver’s steering to help center the vehicle in the lane. Detecting sensor [1] : Front view camera The front view camera is used as a detecting sensor to help detect lane markings and vehicles in front...

Hyundai Santa Fe (TM) 2019-2024 Service Manual: Hood Insulator Pad. Repair procedures

Replacement 1. Using a clip remover, remove the clips and then the hood insulator pad (A). • Be careful not to scratch the hood panel...

Categories

Air bag collision sensors

WARNING

To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death:

Do not hit or allow any objects to impact the locations where air bags or sensors are installed. Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should. Installing bumper guards with nongenuine Hyundai or non-equivalent parts may adversely affect the collision and airbag deployment performance. Press the Engine Start/Stop button to the OFF or ACC position and wait for 3 minutes when the vehicle is being towed to prevent inadvertent air bag deployment. Have all air bag repairs performed by an authorized HYUNDAI dealer.