Repair procedures Adjustment Description The friction material inside the coupling will degrade over time. Therefore, corresponding compensation values must be referenced and entered after replacing the controller or the coupling.
Specification Items Inner side Outer side Front driveshaft Joint type HLSJ#104 BJ#104C Max.
Removal Integrated Body Control Unit (IBU) 1. Disconnect the negative (-) battery terminal. 2. Remove the glove box. (Refer ti Body - "Glove Box") 3.
Oil Specification 1. The R-134a or R-1234yf system requires synthetic (PAG) compressor oil whereas the R-12 system requires mineral compressor oil. The two oils must never be mixed. 2.