Hyundai Santa Fe: Front Door / Front Door Belt Outside Weatherstrip. Repair procedures
1. |
Pull down the front door window glass to the lowest level by pressing
the power window glass switch.
|
2. |
Using a screwdriver or remover, remove the front door belt outside weatherstrip
(A).

|
3. |
To install, reverse removal procedure.
• |
Replace any damaged clips (or pin-type retainers).
|
|
|
Replacement
1.
Remove the front door module.
(Refer to Front Door - "Front Door Module")
2...
Replacement
1.
Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
2...
Other information:
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear combination lamp mounting cap (A).
3.
Loosen the mounting bolts then remove the outside rear combination lamp
(A)...
Ventilation
1. Set the mode to the position.
2. Set the air intake control to the outside (fresh) air position.
3. Set the temperature control to the desired position.
4. Set the fan speed control to the desired speed.
Heating
1. Set the mode to the position...
Categories
Vehicle Identification Number (VIN)

The vehicle identification number (VIN) is the number used in registering your
vehicle and in all legal matters pertaining to its ownership, etc.
The number is punched on the floor under the passenger seat. To check the number,
open the cover.
read more