Hyundai Santa Fe (TM): Integrated memory system / Storing memory positions
1. Shift to P (Park) while the Engine Start/Stop button is in the ON position.
2. Adjust the driver’s seat position, side view mirror position, steering wheel position, instrument panel illumination intensity and head-up display height/brightness to the desired position.
3. Press the SET button. The system will beep once and notify you ‘Press button to save settings’ on the cluster LCD display.
4. Press one of the memory buttons (1 or 2) within 4 seconds. The system will beep twice when the memory has been successfully stored.
5. ‘Driver 1 (or 2) settings saved’ will appear on the cluster LCD display. The message appears only for the driver’s seat position memory setting.
Integrated Memory System for the driver’s seat is provided to store and recall the following memory settings with a simple button operation. Driver’s seat position Side View mirror position WARNING Never attempt to operate the integrated memory system while the vehicle is moving.
1. Shift to P (Park) while the Engine Start/Stop button is in the ON position. 2. Press the desired memory button (1 or 2). The system will beep once, and then the driver’s seat position, side view mirror position, steering wheel position, instrument panel illumination intensity and head-up display height/ brightness will automatically adjust to the stored positions.
Other information:
Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Warning Indicator. Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim. (Refer to Body - "Front door trim") 3. Disconnect the power door mirror connector from the harness BCW indicator
Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Remote Smart Parking Assist (RSPA). Schematic diagrams