Hyundai Santa Fe (TM): Ignition Coil / Specifications

Specification
Item
Specification
Rated Voltage (V)
13.5V
Secondary Coil [Engine 1000RPM standard]
Input voltage (V)
13.5V
Dwell Time (ms)
4.0 - 4.6
Spark current (mA)
Min. 90
Spark duration time (ms)
Min. 2.0
Igniter voltage (V)
400 - 500
Pin
4

Item
Specification
Engine Speed (RPM)
1000
2000
3000
4000
5000
6000
7000
Dwell Time (ms)
4.7
4.7
4.1
3.4
3.1
2.8
2.7
Secondary Coil Voltage (kV)
41
41
41
40
38
36
35

    Troubleshooting Connector assembly status test 1. Remove the ignition coil connectors (A) and reinstall it. Test for changing position of each ignition coil A : Ignition coil w/ misfire code B : Ignition coil w/o misfire code    • Do not move with spark plug at the same time (move the ignition coil only)

    Circuit Diagram Ignition Coil Connector Terminal Function Ignition Coil Terminal Function *Connected to number Ignition Coil #1 (Cylinder #1) Pin No Description Connected to 1 Ground Chassic 2 Ignition Coil #1 Control ECM Connector [93] 3 Ignition Coil #1/#4 Feedback  ECM Connector [82] 4 Battery Power (B+) Main Relay Ignition Coil #2 (Cylinder #2) Pin No Description Connected to 1 Ground Chassic 2 Ignition Coil #2 Control ECM Connector [47] 3 Ignition Coil #2/#3 Feedback  ECM Connector [105] 4 Battery Power (B+) Main Relay Ignition Coil #3 (Cylinder #3) Pin No Description Connected to 1 Ground Chassic 2 Ignition Coil #3 Control ECM Connector [116] 3 Ignition Coil #2/#3 Feedback  ECM Connector [105] 4 Battery Power (B+) Main Relay Ignition Coil #4 (Cylinder #4) Pin No Description Connected to 1 Ground Chassic 2 Ignition Coil #4 Control ECM Connector [24] 3 Ignition Coil #1/#4 Feedback  ECM Connector [82] 4 Battery Power (B+) Main Relay

    Other information:

    Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Evaporator Core. Repair procedures

    Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the heater and blower assembly. (Refer to Heater - "Heater Unit") 3. Remove the heater core.

    Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Special service tools

    Special Service Tools Tool Name / Number Illustration Description LKA Compensator (09890-3V100) Used for compensating front view camera unit Vertical measuring instrument (09964-C1200) Used to measure l

     
    Copyright © 2025 www.hsafe4.com - 0.0116