Hyundai Santa Fe (TM): Advanced Driver Assistance System (ADAS) / Special service tools

Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual / Advanced Driver Assistance System (ADAS) / Special service tools

Special Service Tools
Tool Name / Number
Illustration
Description
LKA Compensator
(09890-3V100)

Used for compensating front view camera unit
Vertical measuring instrument
(09964-C1200)

Used to measure left/right tilts when automatic tolerance compensation for front camera is performed.
Use together with the (09890-3V100). However, do not use it if vertical measuring instrument (09958-3T060) is available.
BCW Sensor Correction Tool Set
(09958-3T500)

Used to correct the blind-spot radar unit.
Case, Manual, String
(09958-3T120)

Used to correct the blind-spot radar unit.
Used to create a center line.
Vertical Plumb
(09958-3T010)

Used to correct the blind-spot radar unit.
Used to create a center line.
Spirit Level
(09958-3T070)

Used to correct the blind-spot radar unit.
Used to measure the horizontal angle.
BCW Unit Fixing Adaptor
(09958-3T080)

Used to correct the blind-spot radar unit.
Used to measure the horizontal angle.
Digital Protractor
(09958-3T090)

Used to correct the blind-spot radar unit.
Used to measure the horizontal angle.
Digital Inclinometer
(09958-3T100)

Used to correct the blind-spot radar unit.
Used to measure the vertical angle.
SCC Setting Reflector
(09964-C1100)

Used for front radar unit setting
Calibration Reflector
(0K964-J5100)

Used for front radar unit setting
SCC Setting Tripod
(09964-C1300)

Used for front radar unit setting

    Description System Description Advanced Driver Assistance System (ADAS) analyzes the exterior environment of a vehicle and driver status to provide visibility / display / guide / warning for driving and parking.

    Other information:

    Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Mode Control Actuator. Repair procedures

    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 7.

    Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Troubleshooting

    Troubleshooting    1) After replacing controller, always check that the system operates properly. 2) If the failure persists after replacing the controller, do not replace th

    Categories

     
    Copyright В© 2025 www.hsafe4.com - 0.0162