Hyundai Santa Fe: Tail Gate / Tail Gate Lift. Repair procedures
•
|
Take care to not let the tailgate fall on you as the lifts are
removed. Have a helper hold the tailgate open, or use a secure
method to hold it open.
|
|
1. |
Using a screwdriver, lift up slightly the socket clips (A) of both ends
on the lifter (B), and then remove the lifter from the bracket.

|
2. |
Push the socket of the lifter into the bracket for installation.
• |
Make sure the tailgate locks and opens properly and
locks securely.
|
|
|
Replacement
[Tailgate lower trim]
•
Put on gloves to prevent hand injuries...
Replacement
1.
Remove the tailgate weatherstrip (A).
•
Do not apply sealant to the body...
Other information:
WARNING
Detach the speed restriction label (1) from the sealant bottle (2), and place
it in a highly visible place inside the vehicle such as on the steering wheel to
remind the driver not to drive too fast.
1. Shake the sealant bottle (2).
2. Remove the cover (A) of the sealant bottle (2) and compressor (6)...
Inspection
Tailgate normal operation transmit / receive process
•
FOB key Switch : FOB key Switch → BMC / SMK → CAN communication
→ PTG Module
•
Driver Switch : Driver Switch → Wiring → PTG Module
•
Outer Switch : Outer Switch → Wiring → SJB → CAN communication
→ PTG Module
① Press the power tailgate open switch
② Transmit / receive power tailgate open signal via CAN communication and wiring
③ Power tailgate open
•
The operation of the power tailgate is activated by mutual communication
with the vehicle's module and switch...
Categories

1. Inside door handle
2. Power window switches
3. Power window lock button/Electronic child safety lock button
4. Side view mirror folding button
5. Side view mirror control switch
6. Central door lock switch
7. Instrument panel illumination control switch
read more