Hyundai Santa Fe: Body (Interior and Exterior) / Tail Gate

Hyundai Santa Fe (TM) 2019-2024 Service Manual / Body (Interior and Exterior) / Tail Gate

Hood Latch. Repair procedures

Replacement 1. Remove the front bumper assembly. (Refer to Front Bumper - "Front Bumper Assembly") 2...

Repair procedures

Adjustment 1. Place the car on a flat surface and check whether the body and trunk lid are well-aligned. 2...

Other information:

Hyundai Santa Fe (TM) 2019-2024 Service Manual: Repair procedures


Replacement    • When removing the fender, wrap protective tape around a screwdriver or remover not to damage components • Put on gloves to prevent hand injuries    • When removing the clips, use a clip remover...

Hyundai Santa Fe (TM) 2019-2024 Service Manual: Seat Heater (Air Ventilation). Repair procedures


Inspection Front Seat 1. Check for continuity and measure the resistance between terminals. No. Description No. Description 1 Heater (+) 3 NTC (-) 2 NTC (+) 4 Heater (-) Driver/Passenger Fabric(± 5%) Leather(± 5%) High 2...

Categories

Air bag collision sensors

WARNING

To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death:

Do not hit or allow any objects to impact the locations where air bags or sensors are installed. Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should. Installing bumper guards with nongenuine Hyundai or non-equivalent parts may adversely affect the collision and airbag deployment performance. Press the Engine Start/Stop button to the OFF or ACC position and wait for 3 minutes when the vehicle is being towed to prevent inadvertent air bag deployment. Have all air bag repairs performed by an authorized HYUNDAI dealer.

read more


 
Copyright © 2024 www.hsafe4.com