Hyundai Santa Fe: Integrated Body Control Unit (IBU) / Schematic diagrams
With Smart Key


Without Smart Key


Specifications
Items
Specifications
Rated voltage
DC 12V
Operating voltage
DC 9 - 16V
Operating temperature
-30°C to 85°C (-22°F to 185°F)
Parastic current
Keyless type : 5...
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the glove box.
(Refer to Body - "Glove Box")
3...
Other information:
System malfunction
When Surround View Monitor is not working properly, or the screen flickers, or
the camera image does not display normally, we recommend that the system be inspected
by an authorized HYUNDAI dealer.
Limitations of the system
When the vehicle is stopped for a long time in winter or when the vehicle
is parked in an indoor parking lot, the exhaust fumes may temporarily blur the
image...
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Disconnect the 6P connector (B) of the coil antenna and then remove
the coil antenna (A) after loosening the screw...
Categories
Electric Power Steering (EPS) warning light
.png)
This warning light illuminates:
When you set the ignition switch or the Engine Start/Stop button to
the ON position.
- The electric power steering warning light illuminates for about 3 seconds
and then goes off.
Whenever there is a malfunction with the electric power steering.
If this occurs, have the vehicle inspected by an authorized HYUNDAI dealer.
read more