| Replacement |
| 1. |
Remove the hood weatherstrip (A).
|
| 2. |
To install, reverse removal procedure.
|
Replacement • When removing and installing the hood lifter, an assistant is necessary.
Component Location 1. Hood latch release handle
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper cover. (Refer to Body - "Rear Bumper Cover") 3. Disconnect the rear corner radar connector (A).
Trouble Symptom Charts Trouble Symptom 1 Trouble Symptom 2 Trouble symptom Probable cause Remedy The set vehicle speed varies greatly upward or downward "Surging" (repeated alternating acceleration and deceleration) occurs after set