Hyundai Santa Fe (TM): Hood / Hood Lift. Repair procedures

Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual / Body (Interior and Exterior) / Hood / Hood Lift. Repair procedures

Replacement
  
•
When removing and installing the hood lifter, an assistant is necessary.
•
When removing the clips, use a clip remover.
1.
Using a screwdriver, lift the socket clips (A) up slightly on both ends of the lifter (B).
2.
Push the socket of the lifter into the bracket for installation.
  
•
Make sure the hood locks/unlocks and opens/closes properly.

    Replacement 1. Using a clip remover, remove the clips and then the hood insulator pad (A).    • Be careful not to scratch the hood panel.

    Replacement 1. Remove the hood weatherstrip (A).    • Be careful not to scratch the hood weatherstrip.

    Other information:

    Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Repair procedures

    Variant Coding    When you need variant coding: – Replace Front View Camera with a new one ※ EOL Variant Coding and calibration required for new replacement Front View Camera Varian

    Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Description and operation

    Description The cruise control system is engaged by the cruise "ON/OFF" main switch located on right of steering wheel column. The system has the capability to cruise, coast, accelerate and resume speed. It also has a safety interrupt, engaged upon depressing brake or shifting select lever.

    Categories

     
    Copyright © 2025 www.hsafe4.com - 0.0139