Hyundai Santa Fe: Engine And Transaxle Assembly / Engine Room Under Cover. Repair procedures
•
|
Be careful not to damage the parts located under the vehicle
(floor under cover, fuel filter, fuel tank and canister) when
raising the vehicle using the lift.
(Refer to General Information - "Lift and Support Points")
|
|
Front Under Cover
1. |
Remove the engine room under cover (A).
Tightening torque
Bolts : 7.8 - 11.8 Nm (0.8 - 1.2 kgf.m, 5.8 - 8.7 lb-ft)
|

|
2. |
Install in the reverse order of removal.
|
Rear Under Cover
1. |
Remove the engine room rear under cover (A).
Tightening torque
3.9 - 5.9 N.m (0.4 - 0.6 kgf.m, 2.9 - 4.3 lb-ft)
|

|
2. |
Install in the reverse order of removal.
|
Removal and Installation
1.
Remove the engine cover (A).
•
Remove the engine cover on room temperature...
Other information:
1. Close all of the doors, the hood and the liftgate.
2. Make sure you have the smart key in your possession and touch either the touch
sensor on the door handle (the engraved part) or press the Door Lock button (1)
on the smart key within 1 second...
Basic Service Symbols
There are five primary symbols used to complement illustrations. These symbols
indicate the part to apply such materials during service.
Symbol
Meaning
Do not reuse the part...
Categories

1. Instrument cluster
2. Driver’s front air bag
3. Engine Start/Stop button
4. Infotainment system
5. Hazard warning lamp switch
6. Climate control system
7. Shift button
8. ISG (Idle Stop and Go) button
9. Auto Hold button
10. Heated steering wheel button
11. Drive mode button
12. DBC (Downhill Brake Control) button
13. Parking Safety button
14. Parking/View button
15. Air ventilation seat button
16. Seat warmer
17. Passenger’s front air bag
18. Glove box
19. Wireless charging system pad
20. Cup holder
21. AC inverter
22. USB charger
read more