Hyundai Santa Fe: Emergency Call System / Emergency Call (eCall) Antenna. Components and components location
RADIO+GNSS+eCall

RADIO+GNSS+DAB+eCall

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the overhead console cover (A)...
Removal
eCall Antenna
1.
Disconnect the negative (-) battery terminal.
2.
Remove the roof trim assembly...
Other information:
If the Smart Key is not working properly, try replacing the battery with a new
one.
Battery Type: CR2032
To replace the battery:
If the Smart Key is not working properly, try replacing the battery with a new
one.
Remove the smart key cover by turning the screwdriver clockwise by inserting
the screwdriver (-) into the hole...
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the heater and blower assembly.
(Refer to Heater - "Heater Unit")
3.
Loosen the mounting screws and remove the heater core cover (A)...
Categories
WARNING
To reduce the risk of an air bag deploying unexpectedly and causing serious
injury or death:
Do not hit or allow any objects to impact the locations where air
bags or sensors are installed.
Do not perform maintenance on or around the air bag sensors. If
the location or angle of the sensors is altered, the air bags may deploy when
they should not or may not deploy when they should.
Installing bumper guards with nongenuine Hyundai or non-equivalent
parts may adversely affect the collision and airbag deployment performance.
Press the Engine Start/Stop button to the OFF or ACC position and
wait for 3 minutes when the vehicle is being towed to prevent inadvertent air
bag deployment.
Have all air bag repairs performed by an authorized HYUNDAI dealer.
read more