Hyundai Santa Fe (TM): ESP(Electronic Stability Program) System / Yaw-rate and G Sensor. Specifications
| Specifications |
|
Description |
Specification |
|
|
Operating voltage |
8 - 16V |
|
|
Output signal |
CAN Interface |
|
|
Operating temperature |
-40 - 85°C (-40 - 185°F) |
|
|
Yaw-rate sensor |
Measurement range |
-128 to +128°/sec |
|
Frequency response |
15 - 45Hz |
|
|
G sensor |
Measurement range |
-1.99 to +1.99g |
|
Frequency response |
50 Hz ± 60% |
|
Description The yaw rate and G sensor is included inside the air bag control module (SRSCM). When the vehicle is turning with respect to a vertical axis the yaw rate sensor detects the yaw rate electroniclly by the vibration change of plate fork inside the yaw rate sensor.
Schematic Diagrams
Other information:
Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Indicators And Gauges
Troubleshooting Troubleshooting Symptom Possible cause Remedy Speedometer does not operate Cluster fuse (10A) blown Check for short and replace fuse Speedometer faulty Check speedometer CAN line faulty
Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: In-car Sensor. Description and operation
Description The In-car air temperature sensor is built in the heater & A/C control unit. The sensor consists of a thermistor that measures the inside temperature. The signal decided by the resistance value that changes in accordance with perceived inside temperature, is delivered to heater control unit, and according t
Categories
- Manuals Home
- Hyundai Santa Fe Owners Manual
- Hyundai Santa Fe Service Manual
- Engine Electrical System
- Troubleshooting
- Emission Control System
- New on site
- Most important about car
