Hyundai Santa Fe (TM): Integrated memory system / Resetting the system
Take the following procedures to reset integrated memory system, when it does not operate properly.
Resetting integrated memory system
1. Stop the vehicle and open the driver’s door with the Engine Start/Stop button in the ON position and the vehicle shifted to P (Park).
2. Adjust the driver’s seat and seatback to the foremost position.
3. Press the SET button and push forward the driver’s seat movement switch over 2 seconds simultaneously.
While resetting integrated memory system
1. Resetting starts with a notification sound.
2. The driver’s seat and seatback is adjusted to the rearward position with the notification sound.
3. The driver’s seat and seatback is re-adjusted to the default position (central position) with the notification sound.
However, in the following cases, the resetting procedure and the notification sound may stop.
- The memory button is pressed.
- The seat control switch is operated.
- The gear is shifted out of P (Park).
- The driving speed exceeds 2 mph (3km/h).
- The driver’s door is closed.
NOTICE
- While integrated memory system is being reset, if the resetting and notification sound stops incompletely, restart the resetting procedure again.
- Make sure that there is no objects around the driver’s seat in advance of resetting the integrated memory system.
1. Shift to P (Park) while the Engine Start/Stop button is in the ON position. 2. Press the desired memory button (1 or 2). The system will beep once, and then the driver’s seat position, side view mirror position, steering wheel position, instrument panel illumination intensity and head-up display height/ brightness will automatically adjust to the stored positions.
The system will move the driver’s seat automatically as follows: With remote key - It will move the driver’s seat rearward when the ignition key is removed.
Other information:
Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Temperature Control Actuator. Description and operation
Description The heater unit includes mode control actuator and temperature control actuator. The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. Signal from control unit adjusts the position of the temperature door by operating the temperature switch
Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Description and operation
Description and operation The System may be limited when • The radar sensor or camera is blocked with a foreign object or debris.