Hyundai Santa Fe (TM): Integrated memory system / Easy access function
The system will move the driver’s seat automatically as follows:
- With remote key
- It will move the driver’s seat rearward when the ignition key is removed.
- It will move the driver’s seat forward when the ignition key is inserted. - With smart key
- It will move the driver’s seat rearward when the Engine Start/ Stop button is pressed to the OFF position.
- It will move the driver’s seat forward when the Engine Start/Stop button is pressed to the ACC or START position.
You can activate or deactivate the Easy Access Function from the User Settings mode on the LCD display. ‘Convenience -> Seat Easy Access -> Off/Normal/Extended’.
CAUTION
Driver should be cautious when using this function to assure no injury to passenger or child on the back seat. In case of emergency the driver has to stop movement of front seat (when easy access feature is activated) by pressing SET button or any of the driver seat control switches.
Take the following procedures to reset integrated memory system, when it does not operate properly. Resetting integrated memory system 1. Stop the vehicle and open the driver’s door with the Engine Start/Stop button in the ON position and the vehicle shifted to P (Park).
Other information:
Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Rear Heater Unit. Repair procedures
Replacement • Be careful not to damage the parts located under the vehicle (floor under cover, fuel filter, fuel tank and canister) when raising the vehicle using the lift.
Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Front View Camera Unit. Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the inside rear view mirror cover (A) and front view camera cover (B). 3.