Hyundai Santa Fe (TM): Airbag Module / Driver Airbag (DAB) Module and Clock Spring. Description and operation
The Driver Airbag (DAB) is installed in the steering wheel and electrically
connected to SRSCM via the clock spring. It protects the driver by deploying
the airbag when frontal crash occurs. The SRSCM determines deployment of the
Driver Airbag (DAB).
| •
|
Never attempt to measure the circuit resistance of the airbag
module (squib) even if you are using the specified tester. If
the circuit resistance is measured with a tester, accidental
airbag deployment will result in serious personal injury.
|
|
Components
1. Driver Airbag
(DAB)
2. Steering Wheel
3. Clock Spring
Other information:
Replacement
•
When removing with a flat-tip screwdriver or remover, wrap protective
tape around the tools to prevent damage to components.
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim.
(Refer to Body - "Front door trim")
3.
Disconnect the power door mirror connector from the harness
BCW indicator