| Description |
| • |
Engine coolant is used for circulating heat in order to heat and cool
the transaxle oil.
|
| • |
Rapidly elevates the transaxle oil temperature during the initial cold
start of the engine.
|
| • |
Prevents over heating of the transaxle oil while the vehicle is moving.
|
| • |
Transaxle oil warm-up and cooling can be done with a single system.
|
| • |
The water coolant and oil are separate in order to exchange heat.
|
Repair procedures • ATF cooler is a unit with the radiator, so refer to radiator removal/installation procedures in the engine section.
Removal • Be careful not to damage the parts located under the vehicle (floor under cover, fuel filter, fuel tank and canister) when raising the vehicle using the lift.
General Safety Information and Caution 1. Be careful when driving the vehicle using the smart cruise control system as follows. (1) On curves or inclines/declines • The smart cruise control system may have limits
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper cover. (Refer to Body - "Rear Bumper Cover") 3. Disconnect the rear corner radar connector (A).