Hyundai Santa Fe: Manual heating and air conditioning / Temperature control

Hyundai Santa Fe (TM) 2019-2024 Owner's Manual / Convenience features / Automatic climate control system / Manual heating and air conditioning / Temperature control

The temperature will increase by pushing the knob upward. The temperature will decrease by pushing the knob downward.

Adjusting the driver and passenger side temperature equally

Press the “SYNC” button to adjust the driver and passenger side temperature equally. The passenger side temperature will be set to the same temperature as the driver side temperature.
Turn the driver side temperature control knob. The driver and passenger side temperature will be adjusted equally.

Adjusting the driver and passenger side temperature individually

Press the “SYNC” button again to adjust the driver and passenger side temperature individually. The button indicator will turn off.

Temperature conversion

If the battery has been discharged or disconnected, the temperature mode display will reset to Centigrade.

To change the temperature unit from °C to °F or °F to °C :

- Automatic climate control system
Press the AUTO button for 3 seconds while pressing the OFF button.
- Instrument cluster
Go to User Settings Mode -> Units -> Temperature Unit.

The temperature unit on both the cluster LCD display and the climate control screen will change.

Mode selection

The actual shape of air conditioner may differ from the illustration. The mode selection button controls the direction of the air flow through the ventilation system...

Air intake control

This is used to select the outside (fresh) air position or recirculated air position. To change the air intake control position, push the control button...

Other information:

Hyundai Santa Fe (TM) 2019-2024 Service Manual: Injector. Specifications

Hyundai Santa Fe (TM) 2019-2024 Service Manual: Passenger Airbag (PAB) Module. Description and operation

Description The passenger airbag (PAB) is installed inside the crash pad and protects the front passenger in the event of a frontal crash. The SRSCM determines if and when to deploy the PAB. • Never attempt to measure the circuit resistance of the airbag module (squib) even if you are using a specified tester...