Hyundai Santa Fe: Parking Safety / System malfunction and limitations

Hyundai Santa Fe (TM) 2019-2024 Owner's Manual / Driver assistance system / Parking Safety / System malfunction and limitations

System malfunction

When Reverse Parking Collision- Avoidance Assist or other related systems are not working properly, the ‘Check Parking Safety system’ warning message will appear on the cluster, and the system will turn off automatically. We recommend that the system be inspected by an authorized HYUNDAI dealer.

System disabled

The rear view camera is used as a detecting sensor to detect pedestrians. If the camera lens is covered with foreign material, such as snow or rain, it may adversely affect camera performance and Reverse Parking Collision-Avoidance Assist may not operate normally. Always keep the camera lens clean.

The rear ultrasonic sensors are located inside the rear bumper to detect objects in the rear area. If the sensors are covered with foreign material, such as snow or rain, it may adversely affect sensor performance and Reverse Parking Collision-Avoidance Assist may not operate normally. Always keep the rear bumper clean.

The ‘Rear camera error or blockage’ or ‘Parking sensor error or blockage’ warning message will appear on the cluster if the following situations occur:

-- The rear view camera is covered with foreign material, such as snow or rain, etc.
-- There is inclement weather, such as heavy snow, heavy rain, etc.

If this occurs, Reverse Parking Collision- Avoidance Assist may turn off or may not operate properly. Check whether the rear view camera and rear ultrasonic sensors are clean.

System operation

Operating conditions If ‘Rear Active Assist’ or ‘Rear Warning Only’ is set from the Settings menu, Reverse Parking Collision-Avoidance Assist will be in the ready status when the following conditions are satisfied: -- The liftgate is closed -- The gear is shifted to R (Reverse) -- Vehicle speed is below 6 mph (10 km/h) -- System components such as the rear view camera and the rear ultrasonic sensors are in normal conditions When Reverse Parking Collision- Avoidance Assist activates, a line appears behind the vehicle image in the instrument cluster...

Limitations of the system

Reverse Parking Collision-Avoidance Assist may not assist braking or warn the driver even if there are pedestrians or objects under the following circumstances: Any non-factory equipment or accessory is installed Your vehicle is unstable due to an accident or other causes Bumper height or rear ultrasonic sensor installation has been modified Rear view camera or rear ultrasonic sensor(s) is damaged Rear view camera or the rear ultrasonic sensor(s) is stained with foreign material, such as snow, dirt, etc...

Other information:

Hyundai Santa Fe (TM) 2019-2024 Service Manual: Side Impact Sensor (SIS). Description and operation


Description The Side Impact Sensor (SIS) system consists of two kinds of side impact sensor which are installed at each center of the front door module (left and right) and two rear sensors which are installed in the rear pillar (left and right)...

Hyundai Santa Fe (TM) 2019-2024 Service Manual: Components and components location


Component Location 1. Start Stop Button(SSB) 2. FOB key 3. Tailgate open switch 4. Interior antenna 1 5. Interior antenna 2 6. Intergrated Body Control Unit (IBU) 7. Trunk antenna 8. Door handle & door antenna 9...

Categories

Vehicle Identification Number (VIN). Vehicle certification label. Tire specification and pressure label

Vehicle Identification Number (VIN)

The vehicle identification number (VIN) is the number used in registering your vehicle and in all legal matters pertaining to its ownership, etc.

The number is punched on the floor under the passenger seat. To check the number, open the cover.

read more


 
Copyright © 2024 www.hsafe4.com