Hyundai Santa Fe: Hydraulic System / SS-A Solenoid Valve (ON/OFF). Components and components location
Component Location (1)_Valve
Body Cover |

1. Valve Body
Cover
2. Valve Body Cover Gasket
3. Solenoid Valve Connector
|
|
Component Location (2)_Solenoid
Valve |

1. 26 Brake
Control Solenoid Valve
2. 35R Clutch Control Solenoid Valve
3. Underdrive Brake Control Solenoid Valve
4. Overdrive Clutch Control Solenoid Valve
5. ON/OFF Solenoid Valve
6. Torque Converter Control Solenoid Valve (Damper Clutch Control Solenoid
Valve)
7. Line Pressure Control Solenoid Valve
8. Support Bracket (Direct Control Solenoid Valve)
9. Support Bracket (Indirect Control Solenoid Valve)
10. Roller
|
|
Description
•
SS-A solenoid valve is attached to the valve body and is an on/off solenoid
valve that is used to change gears...
Specifications
▷ Control type : Normally low type
Shape
Items
Specifications
Control voltage [V]
9 - 16
Supply pressure [kpa (kgf/cm², psi)]
490...
Other information:
Opening the hood
1. Park the vehicle and set the parking brake.
2. Pull the release lever to unlatch the hood. The hood should pop open slightly.
3. Go to the front of the vehicle, raise the hood slightly, push up the secondary
latch (1) inside of the hood center and lift the hood...
The paddle shifter is available when the shift button is in the D (Drive) position
or the manual shift mode.
With the shift button in the D position
The paddle shifter will operate when the vehicle speed is more than 6 mph.
Pull the [+] or [-] paddle shifter once to shift up or down one gear and the
system changes from automatic mode to manual shift mode...
Categories

1. Inside door handle
2. Power window switches
3. Power window lock button/Electronic child safety lock button
4. Side view mirror folding button
5. Side view mirror control switch
6. Central door lock switch
7. Instrument panel illumination control switch
read more