Hyundai Santa Fe: AC Inverter System / Specifications

Hyundai Santa Fe (TM) 2019-2025 Service Manual / Body Electrical System / AC Inverter System / Specifications

Specification

Item	Specification
Rated Voltage	DC 12.5V
Operating voltage	DC 12.2 - 15.0V
Operating temperature	-30°C to 75°C
Output voltage	AC 198 - 242V (rms)
Output frequency	60 ± 6 Hz
Rated power	200W (-30°C - 45°C)
Current spec.	Full load input current : Max. 20A Key OFF current : Max 1㎂

Components and components location

AC Inverter Unit. Components and components location

Other information:

Hyundai Santa Fe (TM) 2019-2025 Service Manual: Roof Side Molding. Repair procedures

Replacement • Put on gloves to prevent hand injuries. • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components...

Hyundai Santa Fe (TM) 2019-2025 Service Manual: Speakers. Repair procedures

Inspection 1. Troubleshooting for Speaker (1) Basic inspection of speaker Inspect the sound from speaker after verifying that the speaker mounting screws are removed and the wiring connector is connected to remove any possible vibration transmitted from body trims and surrounding parts...

Categories

Air bag collision sensors

WARNING

To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death:

Do not hit or allow any objects to impact the locations where air bags or sensors are installed. Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should. Installing bumper guards with nongenuine Hyundai or non-equivalent parts may adversely affect the collision and airbag deployment performance. Press the Engine Start/Stop button to the OFF or ACC position and wait for 3 minutes when the vehicle is being towed to prevent inadvertent air bag deployment. Have all air bag repairs performed by an authorized HYUNDAI dealer.