Hyundai Santa Fe: Multifunction Switch / Specifications

Hyundai Santa Fe (TM) 2019-2024 Service Manual / Body Electrical System / Multifunction Switch / Specifications

Specifications
Items
Specifications
Rated voltage
DC 12V
Operating temperature range
-22 to +176°F (-30°C to +80°C)
Rated load
Dimmer & passing switch
High : 0.2A (Relay load)
Low : 0.2A (Relay load)
Passing : 0.2A (Relay load)
Lighting switch
Lighting : 0.2A (Relay load)
(High, Low, Auto)
Fog lamp switch
0.2A (Relay load)
Turn signal switch
6.6A (Lamp load)
Wiper & mist switch
Low : 4.5A (Motor load)
High : 4.5A (Motor load)
Intermittent : 0.25 mA
Lock : Max. 28A (Motor load)
Washer : 4.0A (Motor load)
Rear wiper & washer
Wiper : 1.0A (Relay load)
Washer : 4.0A (Motor load)

    Components and components location

    ..

    Repair procedures

    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the steering wheel...

    Other information:

    Hyundai Santa Fe (TM) 2019-2024 Service Manual: Rear Door Window Glass. Repair procedures


    Replacement 1. Remove the rear door trim. (Refer to Rear door - " Rear door trim") 2. Using a remover and separate the rear door belt outside weatherstrip (A)...

    Hyundai Santa Fe (TM) 2019-2024 Service Manual: Repair procedures


    Adjustment Glass Adjustment    • Check the glass run channel for damage or deterioration, and replace them if necessary...

    Categories

    Air bag - supplemental restraint system

    1. Driver’s front air bag
    2. Passenger’s front air bag
    3. Side air bag
    4. Curtain air bag

    The vehicles are equipped with a Supplemental Air Bag System for the driver’s seat and front passenger’s seats.

    The front air bags are designed to supplement the three-point seat belts. For these air bags to provide protection, the seat belts must be worn at all times when driving.

    read more


     
    Copyright © 2024 www.hsafe4.com