Hyundai Santa Fe: Heating and air conditioning / Mode selection

Hyundai Santa Fe (TM) 2019-2024 Owner's Manual / Convenience features / Manual climate control system / Heating and air conditioning / Mode selection

The mode selection button controls the direction of the air flow through the ventilation system.

Face-Level (B, C, E)

Air flow is directed toward the upper body and face. Additionally, each outlet can be controlled to direct the air discharged from the outlet.

Bi-Level (B, C, D, E, F, G)

Air flow is directed towards the face and the floor.

Floor-Level (A, C, D, E, F, G)

Most of the air flow is directed to the floor, with a small amount of the air being directed to the windshield and side window defrosters.

Floor/Defrost-Level (A, C, D, E, F, G)

Most of the air flow is directed to the floor and the windshield with a small amount directed to the side window defrosters.

Front defroster (A, D)

Most of the air flow is directed to the windshield with a small amount of air directed to the side window defrosters.

A/C MAX-Level (B, D)

To operate the A/C MAX, turn the temperature control knob to extreme left. Air flow is directed toward the upper body and face.

In this mode, the air conditioning and the recirculated air position will be selected automatically.

After the interior has cooled sufficiently, whenever possible, move the temperature knob away from A/C MAX and press the A/C button.

Instrument panel vents

The outlet vents can be opened or closed separately using the vent control lever. If you move the vent control lever to the left end, the outlet vents can be closed.

    Heating and air conditioning

    1. Start the engine. 2. Set the mode to the desired position. To improve the effectiveness of heating and cooling, select: - Heating: - Cooling: 3. Set the temperature control to the desired position...

    Temperature control. Air intake control

    Temperature control The temperature will increase by turning the knob to the right. The temperature will decrease by turning the knob to the left. Air intake control This is used to select outside (fresh) air position or recirculated air position...

    Other information:

    Hyundai Santa Fe (TM) 2019-2024 Service Manual: Variable Intake Solenoid (VIS) Valve. Repair procedures


    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the VIS valve connector. 3. Measure resistance between VIS valve terminals 1 and 2. Specification : Refer to "Specification" Removal 1...

    Hyundai Santa Fe (TM) 2019-2024 Service Manual: Radiator Grill. Components and components location


    ..

    Categories

    Armrest

    The armrest is located in the center of the rear seat. Pull the armrest down from the seatback to use it.

    read more


     
    Copyright © 2024 www.hsafe4.com