Hyundai Santa Fe: Lighting System / Room Lamp. Repair procedures

Hyundai Santa Fe (TM) 2019-2024 Service Manual / Body Electrical System / Lighting System / Room Lamp. Repair procedures

Inspection

1.	Remove the room lamp assembly then check for continuity between terminals.

Removal

1.	Disconnect the negative (-) battery terminal.

2.	Detach the lamp lens (A) from the room lamp with a flat-tip screwdriver.

3.	Separate the room lamp (A) from the roof trim after loosening the screws (2EA).

4.	Remove the room lamp (B) after disconnecting the connector (A).

5.	If it is necessary replace the room lamp bulb (A).

Installation

1.	Install the room lamp assembly after connecting the lamp connector.

2.	Install the lamp lens after assembling the bulb.

Turn Signal Lamp. Repair procedures

Removal Outside Rear View Mirror • Put on gloves to prevent hand injuries...

Overhead Console Lamp. Repair procedures

Inspection 1. Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the map lamp switch...

Other information:

Hyundai Santa Fe (TM) 2019-2024 Service Manual: Driver Airbag (DAB) Module and Clock Spring. Components and components location

Hyundai Santa Fe (TM) 2019-2024 Service Manual: CVVT & Camshaft. Description and operation

Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by the engine speed and load. By controlling CVVT, the valve over-lap or under-lap occurs, which makes better fuel economy and reduces exhaust gases (NOx, HC) and improves engine performance through reduction of pumping loss, internal EGR effect, improvement of combustion stability, improvement of volumetric efficiency, and increase of expansion work...