Hyundai Santa Fe: Body Electrical System / Lighting System
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the roof trim assembly...
Component Location
1. Head lamp
(Low)
2. Head lamp (High)
3. Daytime running light (DRL)/Positioning lamp
4. Turn signal lamp
5...
Other information:
Inspection
1.
Check the resistance of the ambient temperature sensor between terminals
1 and 2 whether it changes by changing the ambient temperature.
1. Ambient
Sensor (+)
2...
WARNING
Detach the speed restriction label (1) from the sealant bottle (2), and place
it in a highly visible place inside the vehicle such as on the steering wheel to
remind the driver not to drive too fast.
1. Shake the sealant bottle (2).
2. Remove the cover (A) of the sealant bottle (2) and compressor (6)...
Categories
WARNING
To reduce the risk of an air bag deploying unexpectedly and causing serious
injury or death:
Do not hit or allow any objects to impact the locations where air
bags or sensors are installed.
Do not perform maintenance on or around the air bag sensors. If
the location or angle of the sensors is altered, the air bags may deploy when
they should not or may not deploy when they should.
Installing bumper guards with nongenuine Hyundai or non-equivalent
parts may adversely affect the collision and airbag deployment performance.
Press the Engine Start/Stop button to the OFF or ACC position and
wait for 3 minutes when the vehicle is being towed to prevent inadvertent air
bag deployment.
Have all air bag repairs performed by an authorized HYUNDAI dealer.
read more