Hyundai Santa Fe (TM): Body (Interior and Exterior) / Rear Seat Belt
Rear Seat Belt Retractor. Components and components location
1. Second Row
Seat Belt Retractor
|
2. Third Row
Seat Belt Retractor
|
Rear Seat Belt Retractor. Repair procedures
[Second row seat belt retractor]
| •
|
When installing the belt, make sure not to damage the retractor.
|
|
|
1. |
Remove the luggage side trim.
(Refer to Interior Trim - "Luggage Side Trim")
|
|
2. |
Loosen the mounting bolt and remove the second row seat belt upper anchor
(A).
|
Tightening torque :
39.2 - 53.9 N.m (4.0 - 5.5 kgf.m , 28.9 - 39.8 lb-ft)
|
|
|
3. |
Loosen the mounting bolt and remove the second row seat belt retractor(A).
|
Tightening torque :
39.2 - 53.9 N.m (4.0 - 5.5 kgf.m , 28.9 - 39.8 lb-ft)
|
|
|
4. |
To install, reverse removal procedure.
|
• |
Make sure the connector is plugged in properly.
|
|
• |
Replace any damaged clips (or pin-type retainers).
|
|
|
[Third row seat belt retractor]
| •
|
When installing the belt, make sure not to damage the retractor.
|
|
|
1. |
Remove the luggage side trim.
(Refer to Interior Trim - "Luggage Side Trim")
|
|
2. |
Loosen the mounting bolt and remove the Third row seat belt upper anchor
(A).
|
Tightening torque :
39.2 - 53.9 N.m (4.0 - 5.5 kgf.m , 28.9 - 39.8 lb-ft)
|
|
|
3. |
Loosen the mounting bolt and remove the third row seat belt webbing
guide (A).
|
|
4. |
Loosen the mounting bolt and remove the third row seat belt retractor
(A).
|
Tightening torque :
39.2 - 53.9 N.m (4.0 - 5.5 kgf.m , 28.9 - 39.8 lb-ft)
|
|
|
5. |
To install, reverse removal procedure.
|
• |
Make sure the connector is plugged in properly.
|
|
• |
Replace any damaged clips (or pin-type retainers).
|
|
|
Rear Center Seat Belt Retractor. Components and components location
1. Rear center
seat belt retractor
|
|
Rear Center Seat Belt Retractor. Repair procedures
| •
|
When installing the belt, make sure not to damage the retractor.
|
|
|
1. |
Remove the second row seat back cover[LH].
(Refer to Rear Seat -"Rear Seat Back Cover")
|
|
2. |
Loosen the rear center seat belt lower anchor mounting bolt (A) at the
bottom of the second row seat cushion [LH].
|
Tightening torque :
39.2 - 53.9 N.m (4.0 - 5.5 kgf.m , 28.9 - 39.8 lb-ft)
|
|
|
3. |
Loosen the mounting nut and remove the rear center seat belt retractor
(A).
|
Tightening torque :
39.2 - 53.9 N.m (4.0 - 5.5 kgf.m , 28.9 - 39.8 lb-ft)
|
|
|
4. |
To install, reverse removal procedure.
|
• |
Replace any damaged clips.
|
|
|
Rear Seat Belt Buckle. Components and components location
[Second row seat belt buckle]
1. Second row
seat belt buckle [LH]
2. Second row center seat belt buckle
|
3. Second row
seat belt buckle [RH]
|
[Third row seat belt buckle]
1. Third row
seat belt buckle
|
|
Rear Seat Belt Buckle. Repair procedures
[Second row seat belt buckle]
| •
|
Be sure to remove the second row center seat belt buckle (A)
and the second row seat assembly [RH] (B) after removing the
second row seat assembly [LH / RH].
|
| 1) |
Second row seat assembly [LH] is positioned at the rearside,
and second row seat assembly [RH] is positioned at the frontside.
|
| 2) |
Loosen the mounting bolt (C) and remove the second row center
seat belt buckle and the second row seat assembly [LH].
|
|
[Center]
|
1. |
Remove the second row seat assembly [RH].
(Refer to Rear Seat -"Rear Seat Assembly")
|
|
2. |
Loosen the mounting nut and remove the second row seat belt buckle (A).
|
Tightening torque :
39.2 - 53.9 N.m (4.0 - 5.5 kgf.m , 28.9 - 39.8 lb-ft)
|
|
|
3. |
To install, reverse removal procedure.
|
[RH]
|
1. |
Remove the second row seat assembly [RH].
(Refer to Rear Seat -"Rear Seat Assembly")
|
|
2. |
Loosen the mounting screw and remove the rear seat inner cover (A).
|
|
3. |
Loosen the mounting bolt and remove the second row seat belt buckle
[RH] (A)
|
Tightening torque :
39.2 - 53.9 N.m (4.0 - 5.5 kgf.m , 28.9 - 39.8 lb-ft)
|
|
|
4. |
To install, reverse removal procedure.
|
• |
The buckle and tongue of different types are impossible
to be latched, so check that the buckle & tongue have
the same types.
|
|
• |
Distinguish the rear side seat buckle from the center
seat buckle before latching.
|
|
• |
If foreign materials are stuck in the inside button
of buckle, it may cause interference during the latching
process, leading to a functional problem (for example-
beverages (viscous drinks), toothpicks, sand, plastic,
vinyl, metal pieces, etc.).
|
|
• |
After latching the buckle and tongue, check the fastening
force using a Push-Pull Gauge (fastening force : 3kgf
or less)
|
|
|
[Third row seat belt buckle]
|
1. |
Remove the third row seat assembly [RH].
|
|
2. |
Loosen the mounting bolt and remove the third row seat belt buckle [LH]
(A).
|
Tightening torque :
39.2 - 53.9 N.m (4.0 - 5.5 kgf.m , 28.9 - 39.8 lb-ft)
|
|
|
3. |
To install, reverse removal procedure.
|
Components and components location
Components
1. Front seat
belt retractor
2. Second row seat belt retractor
3.
Other information:
Components and components location
Component Location
1. Head lamp
leveling actuator
Head Lamp Leveling Switch. Schematic diagrams
Circuit diagram
Head Lamp Leveling Switch. Repair procedures
Inspection
1.
Inspection
•
Before measuring the pressure of the refriferant line, check
whether the refrigerant amount is charged in accordance with
the specified charging amount.
