Hyundai Santa Fe: Rear Door / Rear Door Outside Handle. Components and components location
1. Rear Door
Outside Handle
|
|
Replacement
1.
Remove the rear door window glass.
(Refer to Rear Door - "Rear Door Window Glass")
2...
Replacement
1.
Remove the plug hole and loosen the mounting bolt, remove the rear door
outside handle (A).
Tightening torque :
7...
Other information:
The USB charger is designed to recharge batteries of small size electrical devices
using a USB cable.
The electrical devices can be recharged when the Engine Start/Stop button is
in the ACC or ON (or START) position.
The battery charging state may be monitored on the electrical device...
Description
•
The hydraulic system consists of a valve body, an oil filter and an
oil pump.
•
The oil pump is powered by the engine. ATF passes through the oil filter
and gets distributed along the oil channels...
Categories
WARNING
To reduce the risk of an air bag deploying unexpectedly and causing serious
injury or death:
Do not hit or allow any objects to impact the locations where air
bags or sensors are installed.
Do not perform maintenance on or around the air bag sensors. If
the location or angle of the sensors is altered, the air bags may deploy when
they should not or may not deploy when they should.
Installing bumper guards with nongenuine Hyundai or non-equivalent
parts may adversely affect the collision and airbag deployment performance.
Press the Engine Start/Stop button to the OFF or ACC position and
wait for 3 minutes when the vehicle is being towed to prevent inadvertent air
bag deployment.
Have all air bag repairs performed by an authorized HYUNDAI dealer.
read more