Hyundai Santa Fe: Rear Door / Rear Door Belt Inside Weatherstrip. Repair procedures
1. |
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
|
2. |
Remove the rear door belt inside weatherstrip (A).

|
3. |
To install, reverse removal procedure.
• |
When installing, install it by first contacting the
inside part (basis point of assembly) of arrow to door
frame.
|
• |
Replace any damaged clips.
|
|
|
Replacement
1.
Pull down the rear door window glass to the lowest level by pressing
the power window glass switch...
Replacement
[Rear door side weatherstrip]
1.
Loosen the rear door checker (B) mounting bolt.
Tightening torque :
21...
Other information:
Inspection
•
Refer to the DTC manual for the check procedure.
Removal
•
Be careful not to damage the parts located under the vehicle
(floor under cover, fuel filter, fuel tank and canister) when
raising the vehicle using the lift...
For safe operation, carefully read and follow the instructions in this manual
before use.
(1) Compressor
(2) Sealant bottle
The Tire Mobility Kit is a temporary fix to the tire and the tire should be inspected
by an authorized HYUNDAI dealer as soon as possible...
Categories
Vehicle Identification Number (VIN)

The vehicle identification number (VIN) is the number used in registering your
vehicle and in all legal matters pertaining to its ownership, etc.
The number is punched on the floor under the passenger seat. To check the number,
open the cover.
read more