Hyundai Santa Fe: Power Windows / Power Window Switch. Schematic diagrams

Hyundai Santa Fe (TM) 2019-2024 Service Manual / Body Electrical System / Power Windows / Power Window Switch. Schematic diagrams

Circuit Diagram
[Driver Power Window Switch]
Driver safety switch

Front safety switch

ALL safety switch

[Assist Power Window Switch]

[Rear Power Window Switch]

    Power Window Switch. Components and components location

    ..

    Power Window Switch. Repair procedures

    Diagnosis with diagnostic tool Diagnosis with diagnostic tool 1. In the body electrical system, failure can be quickly diagnosed by using the vehicle diagnostic system (diagnostic tool)...

    Other information:

    Hyundai Santa Fe (TM) 2019-2024 Service Manual: Schematic diagrams


    Circuit Diagram ABS / ESC ESCi/ESCi+(EPB Integrated) Terminal Function ABS / ESC PIN No Desciption Current Resistance 1 Pump motor supply voltage 60 A 10 mΩ 2 - - - 3 - - - 4 C-CAN High 100 mA 250 mΩ 5 C-CAN Low 100 mA 250 mΩ 6 - - - 7 P-CAN Low 100 mA 250 MΩ 8 P-CAN High 100 mA 250 MΩ 9 Wheel speed sensor supply voltage (Left rear) 100 mA 250 MΩ 10 Wheel speed sensor supply voltage (Right rear) 100 mA 250 MΩ 11 Wheel speed sensor supply voltage (Right front) 100 mA 250 MΩ 12 Wheel speed sensor supply voltage (Left front) 100 mA 250 MΩ 13 Recycle pump ground 40 A 10 MΩ 14 - - - 15 Clutch stroke sensor signal 1...

    Hyundai Santa Fe (TM) 2019-2024 Owner's Manual: Securing a Child Restraint System seat with “Tether Anchor” system


    First secure the child restraint with the LATCH lower anchors or the seat belt. If the child restraint manufacturer recommends that the top tether strap be attached, attach and tighten the top tether strap to the top tether strap anchor. Child restraint hook holders are located on the rear of the seatbacks...

    Categories

    Air bag collision sensors

    WARNING

    To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death:

    Do not hit or allow any objects to impact the locations where air bags or sensors are installed. Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should. Installing bumper guards with nongenuine Hyundai or non-equivalent parts may adversely affect the collision and airbag deployment performance. Press the Engine Start/Stop button to the OFF or ACC position and wait for 3 minutes when the vehicle is being towed to prevent inadvertent air bag deployment. Have all air bag repairs performed by an authorized HYUNDAI dealer.

    read more


     
    Copyright © 2024 www.hsafe4.com