Hyundai Santa Fe: Lighting System / License Lamps. Repair procedures
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the license lamp lens (A) from the panel after loosening a screw.
![](images/license_lamps_repair_procedures-1345/464/stmbe90363d_n.gif)
|
3. |
Replace the bulb (B) after removing the license lamp (A).
![](images/license_lamps_repair_procedures-1345/464/sdmbe3544d_n.gif)
![](images/license_lamps_repair_procedures-1345/464/sdmbe3545d_n.gif)
|
2. |
Install the license lamp lens.
|
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel...
Removal
High Mounted Stop Lamp
1.
Disconnect the negative (-) battery terminal.
2...
Other information:
WARNING
Do not use the interior lights when driving in the dark. The interior lights
may obscure your view and cause an accident.
NOTICE
Do not use the interior lights for extended periods when the vehicle is turned
off or the battery will discharge...
Operating conditions
If ‘Rear Active Assist’ or ‘Rear Warning Only’ is set from the Settings menu,
Reverse Parking Collision-Avoidance Assist will be in the ready status when the
following conditions are satisfied:
-- The liftgate is closed
-- The gear is shifted to R (Reverse)
-- Vehicle speed is below 6 mph (10 km/h)
-- System components such as the rear view camera and the rear ultrasonic sensors
are in normal conditions
When Reverse Parking Collision- Avoidance Assist activates, a line appears behind
the vehicle image in the instrument cluster...
Categories
Engine oil pressure warning light
![](images/books/1/pages.54(1).png)
This warning light illuminates:
When the engine oil pressure is low.
If the engine oil pressure is low:
1. Drive carefully to the nearest safe location and stop your vehicle.
2. Turn the engine off and check the engine oil level (For more details, refer
to “Engine Oil” section in chapter 9). If the level is low, add oil as required.
read more