Hyundai Santa Fe: ISG system operation / LCD display messages

Hyundai Santa Fe (TM) 2019-2024 Owner's Manual / Driving your vehicle / Idle Stop and Go (ISG) / ISG system operation / LCD display messages

The messages are displayed on the instrument cluster to help use ISG system.

Auto Stop is Off. Shift to P or N to start engine

When the system is deactivated, the ISG off button indicator will illuminate and a message will appear on the cluster LCD display with a warning sound in the following situations.

- When the engine hood is opened.
- When ISG system is not working normally.

If this occurs, depress the brake pedal and restart the engine manually. For your safety, restart the vehicle in the P (Park) position.

Press brake pedal before driving on / Press brake pedal for Auto Start

When the gear is shifted from N (Neutral) to R (Reverse), D (Drive) or Manual shift mode without the brake pedal depressed, a message will appear on the cluster LCD display. To activate auto start, depress the brake pedal.

AUTO STOP elapsed time

AUTO STOP display shows the elapsed time of engine stop by the Idle Stop and Go system.

You may check AUTO STOP elapsed time in the Utility view on the instrument cluster.

Auto start

When the engine stops automatically by ISG, the engine will restart if one of the following is done. - Release the brake pedal. - When Auto Hold is activated, take your foot off the brake pedal and then depress the accelerator pedal...

ISG system off

Other information:

Hyundai Santa Fe (TM) 2019-2024 Service Manual: General safety information and caution

Precautions General Precautions Please read the following precautions carefully before performing the airbag system service. Observe the instructions described in this manual, or the airbags could accidentally deploy and cause damage or injuries...

Hyundai Santa Fe (TM) 2019-2024 Service Manual: Positive Crankcase Ventilation (PCV) Valve. Repair procedures

Removal 1. Remove the cylinder head cover. (Refer to Engine Mechanical System - "Cylinder Head Cover") Installation 1. Install in the reverse order of removal...