| Circuit Diagram |


Specification Temperature [°C (°F)] Resistance (kΩ) -40 (-40) 40.93 - 48.35 -20 (-4) 13.
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the IATS connector. 3.
Oil Specification 1. The R-134a or R-1234yf system requires synthetic (PAG) compressor oil whereas the R-12 system requires mineral compressor oil. The two oils must never be mixed. 2.
Inspection 1. Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air. If bent, gently bend them using a screwdriver or pliers. 2.