| Circuit Diagram |


Specification Item Specification Coil Resistance (Ω) 13.8 - 15.2 [20°C (68°F)]
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the injector connector. 3.
Oil Specification 1. The R-134a or R-1234yf system requires synthetic (PAG) compressor oil whereas the R-12 system requires mineral compressor oil. The two oils must never be mixed. 2.
Replacement 1. Using a Lwrench, remove the cap (A) on the bottom of the receiver-drier. 2. Remove the receiver-drier (A) from condenser using a long nose plier. Check for crumbled receiver-drier and clogged bottom cap filter.