Hyundai Santa Fe: Steering wheel / Heated Steering wheel. Repair procedures

Hyundai Santa Fe (TM) 2019-2025 Service Manual / Steering System / Steering wheel / Heated Steering wheel. Repair procedures

Inpection
1.
Measure a resistance of NTC and Heated pad.
NTC resistance - 10.0 kΩ ± 5 % (25 °C)
Heated pad resistance - 1.68 Ω ± 10 %
2.
Measure a temperature.
The temperature of wheel surface grip must rise from -20 °C to 20 °C within 6 minute
The temperature of wheel surface grip must keep 38 °C ± 4 °C after 25 minute
At that time switch on, all measure point (1 - 8)

    Heated Steering wheel. Schematic diagrams

    ..

    Motor Driven Power Steering

    ..

    Other information:

    Hyundai Santa Fe (TM) 2019-2025 Service Manual: Troubleshooting


    Troubleshooting    1) After replacing controller, always check that the system operates properly. 2) If the failure persists after replacing the controller, do not replace the controller...

    Hyundai Santa Fe (TM) 2019-2025 Owner's Manual: Rear window defroster


    NOTICE To prevent damage to the rear window defroster conducting elements bonded to the inside surface of the rear window, never use sharp instruments or window cleaners containing abrasives to clean the window. The defroster heats the window to remove frost, fog and thin ice from the interior and exterior of the rear window, while the engine is running...

    Categories

    Air bag - supplemental restraint system

    1. Driver’s front air bag
    2. Passenger’s front air bag
    3. Side air bag
    4. Curtain air bag

    The vehicles are equipped with a Supplemental Air Bag System for the driver’s seat and front passenger’s seats.

    The front air bags are designed to supplement the three-point seat belts. For these air bags to provide protection, the seat belts must be worn at all times when driving.

    read more


     
    Copyright © 2025 www.hsafe4.com