Hyundai Santa Fe (TM): Fuel Filler Door / Fuel Filler Door Release Actuator. Repair procedures

Removal

1.	Remove the left luggage side trim. (Refer to Body - "Luggage Side Trim")

2.	Disconnect the connector (A) and then remove the release actuator (B).

3.	Disconnect the cable (A) and then remove the release actuator.

4.	Check for continuity between terminal No. 1 and No. 2. If there is no continuity, replace the fuel filler door release actuator (A).

Component Location 1. Fuel filler door release actuator

Fuses And Relays❯

Other information:

Removal • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.