Hyundai Santa Fe: Front Door / Front Door Belt Inside Weatherstrip. Repair procedures
1. |
Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
|
2. |
Remove the front door belt inside weatherstrip (A).

|
3. |
To install, reverse removal procedure.
• |
When installing, install it by first contacting the
inside part (basis point of assembly) of arrow to door
frame.
|
• |
Replace any damaged clips (or pin-type retainers).
|
|
|
Replacement
1.
Pull down the front door window glass to the lowest level by pressing
the power window glass switch...
Replacement
[Front door side weatherstrip]
1.
Loosen the front door checker (B) mounting bolt.
Tightening torque :
21...
Other information:
Replacement
•
Put on gloves to prevent hand injuries.
•
When removing with a flat-tip screwdriver or remover, wrap protective
tape around the tools to prevent damage to components...
Engine oil pressure warning light
This warning light illuminates:
When the engine oil pressure is low.
If the engine oil pressure is low:
1. Drive carefully to the nearest safe location and stop your vehicle.
2. Turn the engine off and check the engine oil level (For more details, refer
to “Engine Oil” section in chapter 9)...
Categories

1. Inside door handle
2. Power window switches
3. Power window lock button/Electronic child safety lock button
4. Side view mirror folding button
5. Side view mirror control switch
6. Central door lock switch
7. Instrument panel illumination control switch
read more