| Components |

| 1. Lower cover 2. Switch bezel 3. Remote control switch 4. Paddle shift |
5. Damper 6. Steering Wheel 7. Wiring 8. Drive airbag module (DAB) |
Removal 1. Turn the steering wheel so that the front wheels can face straight ahead. 2. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper cover. (Refer to Body - "Rear Bumper Cover") 3. Disconnect the rear corner radar connector (A).
Inspection Tolerance Compensation Tolerance compensation compensates for the error margins of surround view video that occur due to the installation tolerance when the four cameras that comprise the SVM system are installed. You must carry out tolerance compensation if you do any of the following.