Hyundai Santa Fe: Charging System / Components and components location

1. ECM
2. Battery
3. Alternator
4. Starter
|
5. Instrument
Cluster
6. Ignition switch or start/stop button
7. Battery sensor
8. Hood switch
|
Description
The charging system includes a battery, an alternator with a built-in regulator,
and the charging indicator light and wire...
Troubleshooting
•
Be careful not to short-circuit the wiring by the body or other
wirings...
Other information:
Description
1.
Driving state
Sensor transmissions occur every 1 minutes and pressure is measured
every 15 seconds.
2.
Stationary state
Sensor transmissions does not occur and pressure is measured every 60
seconds...
Operating conditions
If ‘Rear Active Assist’ or ‘Rear Warning Only’ is set from the Settings menu,
Reverse Parking Collision-Avoidance Assist will be in the ready status when the
following conditions are satisfied:
-- The liftgate is closed
-- The gear is shifted to R (Reverse)
-- Vehicle speed is below 6 mph (10 km/h)
-- System components such as the rear view camera and the rear ultrasonic sensors
are in normal conditions
When Reverse Parking Collision- Avoidance Assist activates, a line appears behind
the vehicle image in the instrument cluster...
Categories
WARNING
To reduce the risk of an air bag deploying unexpectedly and causing serious
injury or death:
Do not hit or allow any objects to impact the locations where air
bags or sensors are installed.
Do not perform maintenance on or around the air bag sensors. If
the location or angle of the sensors is altered, the air bags may deploy when
they should not or may not deploy when they should.
Installing bumper guards with nongenuine Hyundai or non-equivalent
parts may adversely affect the collision and airbag deployment performance.
Press the Engine Start/Stop button to the OFF or ACC position and
wait for 3 minutes when the vehicle is being towed to prevent inadvertent air
bag deployment.
Have all air bag repairs performed by an authorized HYUNDAI dealer.
read more