Hyundai Santa Fe (TM): Interior Trim / Center Pillar Trim. Components and components location
| Component Location |
| 1. Center Pillar
Lower Trim |
2. Center Pillar
Upper Trim |
Replacement • Put on gloves to prevent hand injuries.
Replacement [Center pillar lower trim] • Put on gloves to prevent hand injuries.
Other information:
Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Mode Control Actuator. Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 7.
Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Repair procedures
Inspection Tolerance Compensation Tolerance compensation compensates for the error margins of surround view video that occur due to the installation tolerance when the four cameras that comprise the SVM system are installed. You must carry out tolerance compensation if you do any of the following.
Categories
- Manuals Home
- Hyundai Santa Fe Owners Manual
- Hyundai Santa Fe Service Manual
- Driver assistance system
- Folding the side view mirror
- Heating,Ventilation And Air Conditioning
- New on site
- Most important about car
